Digital Programmable Stirring Hot Plates
Digital Programmable Stirring Hot Plates by Torrey Pines Scientific have advanced features and are easy to use.
In manual operation, simply select the parameter to be set and enter the value needed and the unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.
Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.
You have your choice of two different heater top materials, ceramic and aluminum.
Ceramic glass tops have a maximum plate surface temperature of 450ºC. They heat and cool very quickly. They are designed for heating a solution in a vessel, and they are very chemically resistant.
The aluminum tops have a maximum plate surface temperature of 450ºC. They are recommended for heating a solid on the heater plate surface. They heat much more evenly across the plate surface than the ceramic plates.
Note: All units are supplied with a stainless steel immersion probe. All units are 115V rates. If you desire a 230V unit, please contact us.
Includes the following product variants: EchoTherm™ HS61, EchoTherm™ HS61A, EchoTherm™ HS60, EchoTherm™HS60A, EchoTherm™HS40, EchoTherm™ HS40A
Learn More About These Hot PlatesProduct Information
- 15.2cm x 15.2cm and 20.3cm x 20.3cm have a 2 Liter capacity
- 30.5cm x 30.5cm has a 10 Liter capacity
- 10-program memory stored in CMOS. No batteries required
- Each program can be 10 steps, where each step includes a temperature, stirring speed, time and heating rate
- Repeat any program 1–98 times automatically. Infinite repeats settable
- Programmable and non-programmable operation
- Platinum RTD temperature measurement for ±1% accuracy
- Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface
- Milled-flat cast aluminum top available for use with solids on the plate surface (‘A’ versions)
- Temperature ramping for exact heating and cooling rates
- PID temperature control to 1°C on plate surface or solution with accessory probe
- Stir aqueous solutions from 100–1500 rpm
- Stirrer capacity aqueous solutions: 2 liters HS40, 4 liters HS60 and 4 liters HS61
- Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
- Electronic calibration stored in CMOS
- RS232 interface for control or recording data on a computer
- Custom display of all parameters all the time
- 12-month warranty
- UL, CSA and CE compliant