|
EZ Cut™ LCP Starter Kit
- (20)LCP EZ-Cut™ Sandwich Sets
- (1) 10 μL Syringe (for manual dispensing)
- (2) 100 μL Syringe (for mixing)
- (1) Manual Dispenser
- (1) Symmetrical Mixer Union for LCP
- (6) short 22 gauge small hub needles
- (1) Monoolien-9 (1g)
- (1) 4″ Soft Rubber Brayer
- (1) Wizard Cubic LCP Screen
- (1) Box (20) MicroMounts: M2-L18SP-A1
- (1) Box (20) MicroMounts: M2-L18SP-A2
- (40) Reusable bases model B1A-R
- (1) pair serrated tweezers
- (1) pair curved-tipped tweezers
- (1) Retractable blade X-Acto knife
|
 |
|
Classic LCP Starter Kit
- (20)LCP Classic Sandwich Sets
- (1) 10 μL Syringe (for manual dispensing)
- (2) 100 μL Syringe (for mixing)
- (1) Manual Dispenser
- (1) Symmetrical Mixer Union for LCP
- (6) short 22 gauge small hub needles
- (1) Monoolien-9 (1g)
- (1) 4″ Soft Rubber Brayer
- (1) Wizard Cubic LCP Screen
- (1) Box (20) MicroMounts: M2-L18SP-A1
- (1) Box (20) MicroMounts: M2-L18SP-A2
- (40) Reusable bases model B1A-R
- (1) pair serrated tweezers
- (1) Carbon Scribe
- (5) replacement scribe tips
|
 |
|
Custom Kits
We understand that every lab is different. If you have special needs,
contact us and we will put together a custom kit for you
|
 |
FAQ
Does the EZ-Cut™ top cover film need to be silanized?
No, due to the surface characteristics of the EZ-Cut™ material, silanization is not required. The material has been tested by our users and performs well for LCP crystallization without additional treatment.
Will samples dry out faster with the EZ-Cut™ material as compared to glass cover plates?
No, not measurably. The EZ-Cut™ material is an extremely good vapor barrier, comparable to glass, but much easier to remove for harvesting.
Can I just buy the EZ-Cut™ cover films and use them with my existing stock of base plates and 96-well self-adhesive gaskets?
Yes, just order part number MLCP-EZCTF-50.
Technical Specifications
For any questions, please call +1 607 266 877 or email support@mitegen.com
